The DreamLover 2000 system includes a wearable receiver, a remote control and a USB interface.
Permanent attitude enhancer
The receiver is ultra-miniaturized (20mm max thickness, 74mm max width), water-proof and can operate for up to 3 months on a single battery.
The electrodes do not need the application of special gels nor do they cause itching or discomfort.
These features are crucial in obtaining true long-term compliance.
The device can be comfortably worn, without needing to remove it for battery replacements, showers or baths for months at a time -
allowing your male to become thoroughly acclimated to his permanently installed attitude enhancer.
Guaranteed pulse availability
The "Yes Ma'am" button is there, when you need it most
The ultra-thin remote control (less than 8mm thickness)
can be recharged through your PC's USB port.
The battery lasts for months
with a single charge and can be recharged in less than three hours. When the battery is depleted, even just a few seconds of charge allow the device to become
operational for several hours, getting you through a critical moment.
As if that weren't enough, the remote control is fully functional while charging
(concurrent charging and system load supply). The DreamLover 2000 system includes a mini USB adapter allowing you to plug the remote control
into any PC's USB port (OS independent) without carrying around bulky cables.
Because unlike your male, signals should penetrate
Wireless communication (RF) was initially introduced due to the need to activate the device through clothing, and when the male is facing away from the
remote control. So range was not a design priority (remember that visual and auditory contact need to be maintained at all times when the
wearer is being stimulated, or any features are active). However, we've had time to greatly increase the range during our long R&D phase.
The remote control's RF signal is tested to 100% reception within 80 meters line-of-sight,
which reduces to 20 meters LOS if the signal must go directly
through the wearer's body (water absorbs radio frequency waves and attenuates the signal when the wearer is facing away from the source).
Radio frequency is very sensitive to surroundings due to reflection and refraction.
In practice, the remote's signal easily penetrates a couple of walls within an apartment, and this has been confirmed at many different locations.
The DreamLover 2000's range is quite useful for summoning your male when you require service.
Battery saving was not a concern in the design of the USB peripheral, so its signal is several times more powerful,
enough to extend to your entire house penetrating several walls.
Simple and extended usage modes
"The software and features are unique and very usable. "
The staggering number of software functions is enabled by thoroughly optimized microcontroller code and
a wireless protocol of over 40 commands and state messages. The basic features are simple and easily accessible, allowing you
to quickly begin experiencing the benefits of DreamLover 2000 enabled Male Management. The more advanced features, on the other hand,
offer months of exploration.
Safe mode prevents the remote control from engaging
all advanced receiver modes. It is useful to prevent
inexperienced users from accidentally engaging
receiver modes that could trigger frequent automatic
delivery of pulses. Safe mode is engaged as a
factory default and can be disabled with a special
long press key combination (described in the User's
Long term benefits
The DreamLover 2000 is extremely durable, comes with a 2-year warranty, and unlike other electronic products you will be able to maintain it and keep
it looking like new by purchasing brand new enclosures and spare parts. Please read the pulse section for more information
on the psychological effects of long term male training with the DreamLover 2000.
Connectivity in DreamLover 2000 Lite/Pro vs. DreamLover 2000 Pro Mobile Edition
All DreamLover 2000 models have a remote control that can be used to send commands outdoors or when the male is in close proximity.
All DreamLover 2000 models include a USB transmitter that can be used to provide network connectivity.
The main difference in the Mobile Edition as far as connectivity options is that the USB transmitter can connect to Android devices and is more compatible with Windows running under Mac PCs.
The chart below outlines all connectivity options and requirements for all DreamLover 2000 models.
|Any browser1 to Windows PC5||Internet||None||DL2K-LINK plugged in, wearer within a few tens of meters of PC ||
|Any browser1 to Mac PC2||Internet||None||DL2K-LINK plugged in, wearer within a few tens of meters of PC, Windows running on the Mac using Boot Camp3 ||
|Any browser1 to Mac PC2||Internet||None||DL2K-LINK plugged in, wearer within a few tens of meters of PC, Windows running on the Mac using Parallels/VMWare3 ||
|Any browser1 to Android mobile or tablet4||Internet||None||DL2K-LINK plugged in with USB OTG cable (supplied), wearer within a few tens of meters of mobile device, device supports USB Host functionality, wi-fi or mobile data network present ||
|Any mobile phone or Skype to Android mobile or tablet4||SMS||SMS sending capability (no log in needed)||DL2K-LINK plugged in with USB OTG cable (supplied), wearer within a few tens of meters of mobile device, device supports USB Host functionality, ability to receive SMS messages ||
- 1. Any browser means any browser. The controller does not need to install any software, or any hardware or any drivers. Just open a browser under any platform and navigate to the DL Lounge to control your male.
- 2. There is no native Mac OS application. There will not be one in the future. Any reference to DreamLover products being operated on a Mac computer is to be interpreted as involving special methods to run
Windows OS on Apple hardware. When using Mac OS, a genuine copy of Windows must be purchased, installed and made to run on the Mac. We cannot provide assistance of any sort in carrying out this fairly technical task. If you wish to use our
products on a Mac computer, learn to run other Windows applications first, or find someone who can help before you order.
- 3. The difference between running Windows OS on Apple hardware with Boot Camp and Parallels/VMWare is as follows: Boot Camp requires you to boot the PC with Windows OS. During this time you will not be able to access
Mac OS applications. Parallels and VMWare run Windows inside the Mac OS environment in a window. With Parallels/VMWare you can use both Windows and Mac applications at the same time.
- 4. The DL2K-LINK transmitter requires the Android device to have USB Host enabled in both hardware and software. It will not be able to communicate with the device if the device does not have the required
USB host hardware, or USB host kernel modality, or a USB receptacle. Not all DreamLover 2000 functions are supported on Android. Currently leash mode is unsupported as it would be meaningless. Pulse levels,
pulse and arousal timers, PSA and Canine Mode are supported. Silent commands are not supported but may be added soon.
- 5. With the DreamLover 2000 Pro, a driver needs to be installed under Windows, and Driver Signature Enforcement must be disabled at boot by pressing F8. With the DreamLover 2000 Pro Mobile Edition, no driver or
boot time operation is necessary.
The DreamLover 2000 boasts an incredible feature list.
Now, a small quantity of DreamLover 2000 units has been
apportioned to analyze our market and explore our
demand curve by temporarily offering a new, slightly
less feature rich and more affordable flavor of our
flagship product. The DreamLover 2000 Lite
represents exceptional value and is ideal to
introduce your Male to his new training regimen.
You can find below a point by point comparison of the DreamLover 2000 Pro vs Lite features.
Please consult the User's Guide (available for download from the
downloads section) for step by step guidance on how to activate each feature.
|Feature||Description||DreamLover 2000 Lite||DreamLover 2000 Pro, DreamLover 2000 Pro Mobile Edition
||Ultra-miniaturized||Only 20mm maximum thickness||
|Water-proof||Rated IP68 (submersible to > 1m depth)||
|Extra long battery life||Up to 90 days per battery pack depending on arousal inducer usage|
Up to 60 days
Up to 90 days
|Current pulses||Delivers an aversive current pulse in 3 intensities. All pulses are customizable through the DL2K-LINK USB peripheral||
|Tamper evident (NEW)||The device can now sense proper current delivery, removal, improper electrode contact and report these to the
controller both when the pulse is delivered and as aggregate statistics (more)||
|Pager||Summons the male with a series of sounds. Due to the waterproofing, the sound is barely audible when the rubber parts are in place.
For this reason, a sequence of very weak current pulses is also delivered to alert the wearer in noisy environments. ||
|Pulsed timers||Customizable pulsed timers allow hands-free, automated training to be carried out
by administering a number of pulses of a predetermined intensity, separated by a given time interval (configurable).|
|Arousal induction||Hasten an stabilize the male's Maximum Courtship Investment period by delivering three customizable patterns of timed vibrations through a water-proof, overmolded high strength micromotor that fits right inside the chastity aid's cage.||
|Silent commands||Silent commands allow true male behavior automation and remote control.
The silent commands are vibratory patterns. These 10 patterns (8 of which customizable) are learned by the male through upcoming courses
and associated with desired configurable behaviors||
||Learn mode||The DreamLover 2000 receiver can be associated with up to 4 remote controls or DL2K-LINK units. The process by which a DreamLover 2000 receiver is "told" which devices to listen to is called "learn mode".
This process allows multiple DreamLover 2000 remote controls to activate the same receiver, and conversely, allow a single remote control to activate multiple receivers.||
up to 4 transmitters
|Canine mode||The canine mode feature enforces quadrupedal locomotion. Pulses are delivered in quick succession when the receiver is not held horizontal (parallel to the ground) and facing downwards. In
combination with a securely fastened waist band, canine mode allows you to temporarily revoke upright locomotion rights with powerful psychological effect
on the male being trained. On the Pro model, Canine mode is preceded by a non-configurable "silent command" to alert the wearer this mode is being entered. The wearer has approximately
3 seconds to assume the canine position before pulse delivery begins.||
|Leash mode||The leash mode feature allows the wearer to be confined to a specific distance from the transmitter (DL2K-LINK or the DreamLover 2000 remote control). Pulses of increasing
intensity are delivered when the wearer moves too far away from the signal source (distance presets can be configured). When the receiver no longer receives
leash packets (out of range) level 3 pulses are delivered in quick succession until the link is reestablished.||
|Penis Slap Amplifier||The amplifier monitors sudden impacts of the receiver in the accelerometer's Z direction (perpendicular to the abdomen) and it delivers a pulse when one is detected. This enables hands-free delivery of pulses when the remote control is not available.
A mild slap where the receiver is located will result in a pulse being delivered. The PSA is not activated by walking but it does constrain the male to moving with
some grace in order to avoid the PSA being triggered; for this reason the PSA also enables some types of service training.||
|Freeze||The receiver can be "frozen". In this mode it will disregard any incoming messages and simply signal packet reception with a flashing blue light, until it is reset.
Used for safety purposes during certain times or to just test signal reception||
|Reset||The DreamLover 2000 receiver can be reset from the remote control in order to quickly exit any existing modes and restart the firmware||
|Color coded state signaling||A full color RGB blinks and fades in different colors to signal on-going modes and command reception. Some
colors can be customized||
||Extra long battery life||Up to several months per recharge depending on usage||
|Medium range transmitter||Up to 100m range Line of Sight depending on the wearer's orientation and surroundings.
Easily goes through a couple walls (or the floor) in an ordinary home||
|Rechargeable||Battery recharging through a PC's USB port (any OS) with charge start/end indicator||
|All functions accessible||All DreamLover 2000 functions are accessible through 10 remote control keys and a few key combinations outlined in the user's guide
All functions are therefore available in any outdoors situation||
|Auto lock||Remote control powers off and locks automatically after a brief interval of inactivity. One button on each side of the remote control must be pressed simultaneously to turn on
the device. This prevents accidental activation||
|Remote control modes
||Leash mode||The remote control is in Leash Mode when it is set to transmit leash ping packets. This feature is closely related to the receiver's leash mode||
|Listen mode||In listen mode the remote control will receive rather than transmit packets. This mode is used to configure some remote control parameters from the DL2K-LINK such as the remote control's RF channel and
the leash preset stored on the remote control||
|Safe mode||Safe mode prevents the remote control from engaging all advanced receiver modes. It is useful to prevent inexperienced users from accidentally engaging receiver modes
that could trigger frequent automatic delivery of pulses. Safe mode is engaged as a factory default and can be disabled with a special long press key combination
(described in the User's Guide)||
|Long range transmitter||High power RF transmitter, range of hundreds of meters line of sight, easily penetrates all the walls in an ordinary home|
|Pulse customization||By customizing three distinct parameters for each pulse level your DreamLover 2000
can deliver aversive stimuli of varying intensity.||
|Timers customization||Allows you to configure pulsed timer parameters (frequency and pulse strength)|
|Arousal induction customization||Allows you to configure arousal induction patterns (intra-cycle frequency, inter-cycle frequency, number of activations, activation length)||
|Silent commands customization||Define your own silent commands (editable morse pattern + meaning definition which can be learned through our upcoming courseware software)||
|Color customization||Enables you to configure the RGB LED colors on the receiver (total of four configurable colors: Low pulse, Medium pulse, High pulse and Pager color)||
|Online interface||Online male management screen can be accessed through a browser on a PC or standards compliant smartphone. Advanced permissions and security levels (Owner, Ownership assignee, Administrators) enable customized male ownership configurations|
Basic permission settings
Advanced permission settings
|PC remote mode||Allows remote control of your PC applications through the DreamLover 2000's remote control. The PC remote feature will work flawlessly for powerpoint, web scrolling and similar applications.
In this mode, the remote sends commands to the DL2K-LINK only: key presses are not parsed by the receiver||
|RF tools||Change RF channel, monitor signal strength, find a low interference channel and set DreamLover 2000 devices (receiver, remote control) to use
your chosen channel. Includes a recovery tool if any of the devices ever become "lost" or mismatched on unknown different RF channels||
|Battery calculations||Processes the silent commands, timers and pulse parameters to estimate battery consumption under a specific usage scenario||
|Firmware upgrades||Keep your devices up to date with wireless firmware upgrades. The receiver, remote control and DL2K-LINK are all able
to receive the latest firmware versions||
|Stealth pulses||A stealth mini-pulse (no auditory or visual feedback from any of the devices) can be delivered by the DL2K-LINK. This feature is used in
conjunction with the male training courses, and it enables the software to verify whether the device is being worn||
|Courses||Male training courses that utilize the DreamLover 2000's features are planned and will be available to automatically teach and quiz your male on important topics such as grooming, hygiene,
cooking, and more. The course creation software will also be available for custom course creation||
Not all DreamLover 2000 functions are supported on Android. Currently leash mode is unsupported as it would be meaningless. Pulse levels,
pulse and arousal timers, PSA and Canine Mode are supported. Silent commands are not supported but may be added soon.